# $XConsortium: XF86Conf.cpp,v 1.5 95/01/16 13:16:10 kaleb Exp $ # $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.11 1995/01/28 15:46:18 dawes Exp $ # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. This man page is installed as /usr/X11R6/man/man5/XF86Config.5x # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: # LeftAlt Meta # RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock EndSection # ********************************************************************** # Pointer section # ********************************************************************** # The available Pointer protocols # Protocol "BusMouse" # Protocol "Logitech" # Protocol "Microsoft" # Protocol "MMSeries" # Protocol "MouseMan" # Protocol "PS/2" # Protocol "MMHitTab" Section "Pointer" Protocol "PS/2" Device "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Buttons # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic Monitor" VendorName "Unknown" ModelName "Unknown" # Bandwidth is in MHz unless units are specified # Bandwidth 25 Bandwidth 28 # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. #HorizSync 31.5 # typical for a single frequency fixed-sync monitor # HorizSync 35.44 HorizSync 30-64 # multisync # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. #VertRefresh 60 # typical for a single frequency fixed-sync monitor VertRefresh 50-100 # VertRefresh 50-100 # multisync # VertRefresh 60, 65 # multiple fixed sync frequencies # VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz) # These two are equivalent # ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525 Mode "640x480" DotClock 28.35 HTimings 640 664 760 800 VTimings 480 491 493 525 #HTimings 640 664 760 800 #VTimings 480 491 493 525 EndMode # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset "generic" # VideoRam 256 # Clocks 25.2 28.3 EndSection Section "Device" # SVGA server auto-detected chipset Identifier "Generic SVGA" VendorName "Western Digital" BoardName "WD 90C24" # the 90c24 is treated like wd90c30 Chipset "wd90c30" Clocks 28.35 28.32 28.32 28.31 28.31 28.31 28.32 28.32 Clocks 28.32 28.32 28.32 28.34 28.32 28.32 28.32 28.34 Clocks 50.08 EndSection # Section "Device" # Identifier "Any Trident TVGA 9000" # VendorName "Trident" # BoardName "TVGA 9000" # Chipset "tvga9000" # VideoRam 512 # Clocks 25 28 45 36 57 65 50 40 25 28 0 45 72 77 80 75 # EndSection # Section "Device" # Identifier "Actix GE32+ 2MB" # VendorName "Actix" # BoardName "GE32+" # Ramdac "ATT20C490" # Dacspeed 110 # Option "dac_8_bit" # Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0 # Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0 # EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The colour SVGA server Section "Screen" Driver "svga" Device "Generic SVGA" Monitor "Generic Monitor" Subsection "Display" Depth 8 Modes "640x480" ViewPort 0 0 #Virtual 800 600 Virtual 1024 768 EndSubsection EndSection # The 16-colour VGA server #Section "Screen" # Driver "vga16" # Device "Generic VGA" # Monitor "Generic Monitor" # Subsection "Display" # Modes "640x480" # ViewPort 0 0 # Virtual 800 600 # EndSubsection #EndSection # ## The Mono server # #Section "Screen" # Driver "vga2" # Device "Generic VGA" # Monitor "Generic Monitor" # Subsection "Display" # Modes "640x480" # ViewPort 0 0 # Virtual 800 600 # EndSubsection #EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32) # Section "Screen" # Driver "accel" # Device "Actix GE32+ 2MB" # Monitor "Generic Monitor" # Subsection "Display" # Depth 8 # Modes "640x480" # ViewPort 0 0 # Virtual 1280 1024 # EndSubsection # SubSection "Display" # Depth 16 # Weight 565 # Modes "640x480" # ViewPort 0 0 # Virtual 1024 768 # EndSubsection # EndSection